ALL interface counters: clear count [Enter] specific interface counter: clear count [Enter]
Cisco
SIP: debug ccsip all debug ccsip calls debug ccsip events debug ccsip messages debug ccsip preauth debug...
(1) Stopped the replication on all the nodes by running the command “utils dbreplication stop” (1st on...
Upload new code to switch then run: install add file bootflash:filenameofupdate activate commit
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 username@ipaddress
sudo apt install screen sudo dmesg | grep -i tty (find serial port) screen /dev/ttyUSB0
If ER is down (RTMT does not = 2), complete these steps: On the Subscriber, enter the...
Add Backup Repository: Step 1 Open a CLI session with the Prime Infrastructure server. Step 2 Enter...
Hold down mode button while booting switch until you see “The password-recovery mechanism is enabled.” Enter the...
ip dhcp pool [pool name] network [network ID] [subnet mask] default-router [IP address of default gateway] dns-server...
